Powering Interior Plots.

[R1ngo145]

I`m running a city plan in sanctuary and noticed that in one of original sanctuary houses none of the residential plots that are in their have power. How do i power these plots? I saw on a previous thread that you could use a radial power conduit but that doesn't seem to work (cant connect wire) any ideas? I had also assumed that the city plan would automatically power the plots so i am also a little confused as to how this is even an issue.

Any help would be appreciated! Thanks in advance!

 

[Din'elen DarkStar]

Try picking up and dropping the plot right back down in workshop mode. Save first. See if it powers up. Also have you run the Run City Power Lines in the Planners desk? That could help.

 

[R1ngo145]

Try picking up and dropping the plot right back down in workshop mode. Save first. See if it powers up. Also have you run the Run City Power Lines in the Planners desk? That could help.

Ok will do! I haven`t what does that actually do?

 

[Din'elen DarkStar]

Ok will do! I haven`t what does that actually do?

Running City Power Lines will make sure wires are run to all the needed areas, as for the plot pick up and drop it somehow resets the plot more than a refresh does and has worked for me in a lot of the same situations to reset it back on the grid so to say. I even have to do it to exterior plots every once in a while.

 

[R1ngo145]

Running City Power Lines will make sure wires are run to all the needed areas, as for the plot pick up and drop it somehow resets the plot more than a refresh does and has worked for me in a lot of the same situations to reset it back on the grid so to say. I even have to do it to exterior plots every once in a while.

Noted, thanks for the help!

 

[msalaba]

Run City Power Lines in the Planners desk

Note: This feature requires F4SE.
Also note: Some city plans need to be rebuilt so this feature will wire them up correctly. To my knowledge, this hasn't happened yet as the focus is on Chapter 2. You should double check the city plan for power after it is built.

 

[js303]

I've noticed some of my agricultural plots appear to require power but there is no way to connect power and the plot still produces food. Not sure why some ag plots say they need power

 

[Deleted member 10215]

I've noticed some of my agricultural plots appear to require power but there is no way to connect power and the plot still produces food. Not sure why some ag plots say they need power

"Advanced" and "HiTech" subtypes of Agricultural DO require power, I guess it's just there at all times because that probably causes less problems than changing that if you ever change the plot.

 

[Din'elen DarkStar]

I've noticed some of my agricultural plots appear to require power but there is no way to connect power and the plot still produces food. Not sure why some ag plots say they need power

You just need a wired power pole within 15 feet or so to send power to them