Question The newest update with computer research assistant bug

[CodeNamed1]

So the Speak to robot quest stage appeared but the robot only says the usual greetings lines and does not move on, help??

I tried to refresh the plot several times

 

[Phil_T_Casual]

Instead of refreshing the plot leave the cell and he should be working when you return.

 

[CodeNamed1]

I was not in the cell when updated, not even near and I have left like 2times alredy

 

[slink_v_0000]

I had to build a new one. The old one behaved as you described. I used the console commands to advance it so I didn't have to wait forever.

 

[CodeNamed1]

Ok thx, I’ll go see now one more time, if it does not advance I’ll build new. But what commands did you use to advance in the two previous build of that tier to advance?

 

[slink_v_0000]

I don't see a spoiler button anywhere. I'll message it to you.

 

[CodeNamed1]

FINALLY, took me several hours but I finally got it to gave me next assignment after “speak to the robot”

so here is how I did it, if someone else gets some help from it: First I demolished the circuitry lab

2. then used the console Command lovely @slink_v_0000 gave me to upgrade the plot back to Circuitry lab

3. used console some more to setstage 30 and then it updated the quest

BUT!, now I did not know what the robot was supposed to say to me so I’m out of blue what to do as the next quest does not have a marker...


Anyhow BIG THX to you all, especially @slink_v_0000 . Do you have a Nexus account?? I wanna give you Kudos for what you did :D

 

[slink_v_0000]

I think you should not have used setstage on the quest. That was to revive the robot? It was annoying to have to use the four consoles again but you can use unlock on them instead of doing the passwords. I don't know if the order is random, but it is not too hard to try different orders using unlock.

 

[CodeNamed1]

I had to use it would not advance

 

[CodeNamed1]

So Is this state supposed to have Markers on where to find the nuclear grades?

 

[CodeNamed1]

That’s what it seemed when I used xedit to check the quest

 

[slink_v_0000]

So speaking to the robot alone did not give the next step in the quest, even after rebuilding the lab from scratch? Did you actually scrap the plot and build a new plot, or just pick it up and put it down to restart it?

 

[slink_v_0000]

And yes, there are markers for the weapons grade nuclear material. Three of them, for me.

 

[CodeNamed1]

I re-builded it. Should I have to have put a new plot?

 

[slink_v_0000]

I would try a new plot. If that does not work, then I have no suggestions. Sorry.
Oh, and the stages of that quest don't seem to line up with what shows in the CK (and presumably in XEdit). I tried to advance it from stage 160 to stage 170, only to discover that it was already at stage 513 (!). So I had to do that step the hard way.

 

[CodeNamed1]

I’ll try new plot.

Then post how It goes

 

[CodeNamed1]

The robot is alredy awake and the computers open when I build a new plot..

darn!!

Could it matter if I build a new plot to different settlement?

 

[slink_v_0000]

Might be a good experiment.
I'm off to bed. Good luck.

 

[CodeNamed1]

I’ll keep this topic open as long as I have time to try the discussed thing

 

[zodium]

I'm having the same problem of not getting any markers for the nuclear material, and console spawning it or adding it to Input doesn't work. :<