Question Manual Upgrades - Plots

Discussion in 'SS Help (Mod Questions Here)' started by ProgNut, Sep 16, 2020.

  1. ProgNut

    ProgNut New Member

    Joined:
    Sep 16, 2020
    Messages:
    3
    Likes Received:
    0

    I have set all options for manual plot upgrades in hopes of manually approving every plot, every upgrade. I go to the ASAM sensor and Upgrade Options, but the only option is to set to auto-upgrades. I scrolled down the menu and there is no option to just upgrade the plot. Is it possible to manually control this much? If so, what am I missing?
     
  2. ProgNut

    ProgNut New Member

    Joined:
    Sep 16, 2020
    Messages:
    3
    Likes Received:
    0

    I should have added. I have the quest marker present, so I assume the plot is ready for an upgrade?
     
  3. NDCowdy

    NDCowdy Well-Known Member Patreon Supporter

    Joined:
    Sep 30, 2017
    Messages:
    633
    Likes Received:
    862

    As far as I am aware the only plots which have the option to manually upgrade are ones with branching levels, such as with advanced industrial plots. Otherwise I believe that plots options are down to whether you want them to wait for you to have seen them before levelling up any further or not.
     
    RayBo likes this.
  4. ProgNut

    ProgNut New Member

    Joined:
    Sep 16, 2020
    Messages:
    3
    Likes Received:
    0

    Ok, understood. So is there any way to clear the quest markers? I have seen the plots, but the quest marker do not appear to clear.
     
  5. NDCowdy

    NDCowdy Well-Known Member Patreon Supporter

    Joined:
    Sep 30, 2017
    Messages:
    633
    Likes Received:
    862

    A short time after visiting them the markers should disappear, doesn't always work first time.
     

Share This Page