the Sim Settlements forums!

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Caravan plots not connecting south of Oberland Station

VanCrio

New Member
Messages
10
Hello everyone,

I have a serious issue of caravan plots not connecting to caravan network. It includes all settlements south of Oberland Station. Settlements up north are all connected as they should. The plots are operational (without other caravan in range). Everything is provided, settler, energy, caps etc. Tried to reset plot, destroy and rebuild, unasign and assign. Pretty much everything.

Oberland Station just doesn't want to connect to Hangsman Alley and later down south or Castle to Jamaica Plain. But everything north is connected without issue. (County Crossing, Slog, Finch Farm etc.)

Am I missing something? Really need help with this, coz I am at a loss.
 
I had this issue with Nordhagen Beach in a previous save. Even though I had both Finch Farm and County Crossing, both of which are quite close, every time I returned to Nordhagen, it was no longer part of the caravan network. If I rebuilt the plot, or changed it to a different caravan building plan, it would work, but upon the next visit, it was no longer part of the network again...
 
after installing the last 3 or so patches (stopped playing for a month) my Settlement network is also slowly dissolving, if i check the Caravan plots i always get the "No Other Caravan Services In Range" status, rebuilding or reloading the plots wont help. Some Settlements are still in smaller networks, but stop connecting to the main one which slowly looses its member settlements.
 
Okay this is still ongoing for me, cant add any new settlements to the network. Its always "No Other Caravan Services in Range"
I switched the Covenant City plan from Basics to RotC and after that, even that settlement had no Caravan services in range, while not even a minute earlier it was in range, so another Settlement absorbed by the Supply Line Black hole.
I attached my probably too long mod list in the hope a team member or mod is stumbling over this thread. If i can be of any assistance in fixing this, give me a heads up.
Can send the Savegame as well if needed.
 

Attachments

  • Load Order.txt
    4.4 KB · Views: 2
I too am having caravan issues. I am trying to connect sanctuary to starlight drive-in. I am trying really hard to limit anything in my sanctuary area and I don't believe I need caravan services in red rocket. But i am trying to establish a caravan there as well to see. I am also trying to make starlight the, "master" settlement so everything else connects to it. i am using a city plan in tenpines bluff as well. My map in my pip-pad is showing caravan lines from sanctuary to starlight, i see a line from tenpines to starlight, and I even see a light stretching from the castle to starlight drive in but nothing is showing on the caravan network virtual resources, only what the settlement I'm standing in is providing.
I have tried using the recalculate routes, and resource distribution options.
I made sure i was not using a unique settler for sanctuary and starlight doesn't either
Could attributes possibly be the reason? if so late when I get on i will console command them them some higher stats to see if this is the issue.

I am also having issues with caravan supplies reaching GNN so building anything there is nearly impossible.
I also have turned off all the settings for disease, and settler incapacitated. But i am in this weird place with sickness all over and no way to cure the, "unknown disease."

I will also try using the tiny caravan plots, i think i read somewhere those are working?

Please any help to get these virtual resources where I need them to go.
 
Top