Menu
What's new
By:
Filters
the Sim Settlements forums!

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Cannot finish commonwealth rising

Björn

Björn

New Member
Messages
6
So I’ve restarted my game 2 times and every time I hit check out what’s going on in the comm array room I go there none of the department heads are there I cannot find a way to set stage for it I’ve done this with the all chapters mod and tried it running it alone on the sim settlement chapter 2 mod but I’ve had no luck. The SS2C2_Sirick_MQ27 command is also not able to be found. Please help I just want to start chapter 3.
 
Sort by date Sort by votes
Björn said:
So I’ve restarted my game 2 times and every time I hit check out what’s going on in the comm array room I go there none of the department heads are there I cannot find a way to set stage for it I’ve done this with the all chapters mod and tried it running it alone on the sim settlement chapter 2 mod but I’ve had no luck. The SS2C2_Sirick_MQ27 command is also not able to be found. Please help I just want to start chapter 3.
Click to expand...
Hey there! The quest IDs have been changed recently, and I believe eventually will be removed from the wiki to prevent confusion (or updated). Setting stages can unfortunately cause all kinds of issues so the SS2 folks would like to discourage their use.

I have finally been able to replicate this in a save and have included this in my report. Fingers crossed this can be solved very soon.

Thank you for your patience! :)
 
Upvote 0 Downvote
Same issue… more or less. Just for more information, I pretty recently finished Remote Management and Jake and Lupe are there but nothing happens. They wander around. Can’t talk to them. No one else there.
 
Upvote 0 Downvote
Yeah, I’m having the same issue. I was wondering if anyone has ever figured out the new commands for the quest of Commonwealth rising because they haven’t fully updated the wiki yet I just need to use the one to get by the annoying power transfer plots because that’s the one that’s always never seems to work correctly for me.
 
Upvote 0 Downvote
Never mind I was able to figure out the setstage command. It was basically the same command but without Sirick in it so it would be set stage SS2C2_MQ27 10 did some reverse work around by looking at the hot fixed to try to figure it out using the hot fix notes but now it's not triggering the comm array analysis what was the number to trigger that in the old quest ID so I can use it in the new one? I'm stuck on continue recruiting staff and working with HQ.
 
Last edited:
Upvote 0 Downvote
Huntsman616 said:
Never mind I was able to figure out the setstage command. It was basically the same command but without Sirick in it so it would be set stage SS2C2_MQ27 10 did some reverse work around by looking at the hot fixed to try to figure it out using the hot fix notes but now it's not triggering the comm array analysis what was the number to trigger that in the old quest ID so I can use it in the new one? I'm stuck on continue recruiting staff and working with HQ.
Click to expand...
I was able to use sqs ss2c2_mq27 and was able to get everything done like that didn’t get the conversation for the end scene so we will see if I broke it or if I can make it to chapter 3
 
Upvote 0 Downvote
This was hotfixed. Using console commands can put your save file in a bad state and cause problems later down the line that you may not notice until it's unsalvageable. I recommend rolling back to before you used them, updating to the latest version of chapter 3, and continuing.
 
Upvote 0 Downvote
Did something break the HQ infirmary too? Because I'm not getting the option to build it. I'm just gonna revert turn earlier, so you can just run the thing to auto do the quest to see if it unlocks correctly.
 
Last edited:
Upvote 0 Downvote
Do you have an infirmary already, or is it the one for the quest? You could try going to room control (the box on the wall) and change the room purpose to infirmary. Or a different layout of infirmary. Then build it with workshop mode. Worst case, you might have to roll back to before this objective.
 
Upvote 0 Downvote
Antoine Soverie said:
Do you have an infirmary already, or is it the one for the quest? You could try going to room control (the box on the wall) and change the room purpose to infirmary. Or a different layout of infirmary. Then build it with workshop mode. Worst case, you might have to roll back to before this objective.
Click to expand...
I ended up deleting and reinstalling everything off a fresh game bug was still there so I ended up using commands to get to chapter 3 and it has worked so far
 
Upvote 0 Downvote
Huntsman616 said:
Did something break the HQ infirmary too? Because I'm not getting the option to build it.
Click to expand...
Where were you not getting the option? No project in workshop mode? Did you clean the atrium quadrant or whatever? I guess if it works then it works but you know, if it's broken later cause of commands, there's no help.
 
Upvote 0 Downvote
Hey, thanks for the advice everyone I ended up just loading an old, save and running the skip quest from the city managers tape that ended up giving it to me. But with that being said, I officially completed Commonwealth rising and have now started chapter 3, and I am excited. The good thing is the hot fix fixed, chapter 3 automatically starting so I can confirm that’s working.
 
Last edited:
Upvote 0 Downvote
Huntsman616 said:
Hey, thanks for the advice everyone I ended up just loading an old, save and running the skip quest from the city managers tape that ended up giving it to me. But with that being said, I officially completed Commonwealth rising and have now started chapter 3, and I am excited. The good thing is the hot fix fixed, chapter 3 automatically starting so I can confirm that’s working.
Click to expand...
Yay! Have fun and smooth sailing to your player character :)
 
Upvote 0 Downvote
Hey, I ran into another problem. This time it was with chapter 3 I had to use the skip quest with create outpost at the castle, because the path finding did not work with the default blueprint and now Aiden is stuck following me as a guard is there a way like a command to make him stop following would cf "actor.setcompanion" false work? If I do half to roll back the safe to try again, it may be deleted off my computer but they’re still in my recycling bin on my OneDrive so I still can recover to save if I need to. I also might try a new second save because apparently I accidentally installed an add-on for SS2 that I didn’t mean to win I noticed it I removed it and when I removed it, that’s when it started giving me all kinds of errors, probably should’ve mentioned that but yeah accidentally installed Superstructures add on.
 
Last edited:
Upvote 0 Downvote
It's never a good idea to uninstall something and keep playing. I'd suggest to roll back before uninstall and keep it in there. You get a lot of cool plot designs at no expense to anything.
About Aiden and the outpost, probably same. If this was an earlier version, try building the outpost now. Maybe let lupe do it?
 
Upvote 0 Downvote
craig240979 said:
Having exact same problem. Please help as really want to try chapter 3
Click to expand...
not sure whats happening with my game but the hot fix not made any difference to mine still wont talk to me evan after doing many other quests tried a different save fro before this quest and it wont evan advance to this quest anymore also tried the skip quest using holotape and chapter 3 wont start
 
Upvote 0 Downvote
craig240979 said:
not sure whats happening with my game but the hot fix not made any difference to mine still wont talk to me evan after doing many other quests tried a different save fro before this quest and it wont evan advance to this quest anymore also tried the skip quest using holotape and chapter 3 wont start
Click to expand...
Hey there - when you rolled back, where exactly did you roll back to?

And where did you get stuck again?

I am guessing (hoping) no console commands have been used?
 
Upvote 0 Downvote
You must log in or register to reply here.
Top