Solved About Industrial plots

Discussion in 'SS Help (Mod Questions Here)' started by Valwinz, Nov 29, 2019.

  1. Valwinz

    Valwinz New Member

    Joined:
    Nov 22, 2019
    Messages:
    9
    Likes Received:
    3

    So is it normal for Industrial plots to only have 1 plan at Starlight drive-in? but at Santuary they have more?

    Only thing the industrial plots can be at Starlight drive-in are surveys not sure if I'm missing something here
     
  2. NDCowdy

    NDCowdy Well-Known Member Patreon Supporter

    Joined:
    Sep 30, 2017
    Messages:
    324
    Likes Received:
    437

    The specific location should not change the options for plots. When you say only one plan, are you trying to choose a new plot via the asam sensor? Is it basic industrial plots or advanced? Are you talking about what is first built or options for upgrading?
    Advanced Industrial plots can be limited in their upgrade options by needing certain other plots built.
    There can also be a delay for all plot options to load. So if you bring up the option list too soon after loading, all may not be loaded yet.
     
    VersusXV and bullyrook like this.
  3. Valwinz

    Valwinz New Member

    Joined:
    Nov 22, 2019
    Messages:
    9
    Likes Received:
    3

    It seems it is a Avance industrial plot i guess those only get 1 plan at the begining?
    Yes i was looking at ASAM
     
  4. NDCowdy

    NDCowdy Well-Known Member Patreon Supporter

    Joined:
    Sep 30, 2017
    Messages:
    324
    Likes Received:
    437

    parrotheada1a likes this.
  5. Valwinz

    Valwinz New Member

    Joined:
    Nov 22, 2019
    Messages:
    9
    Likes Received:
    3

    So why do you think im only getting 1 option for it them? the prospector tent, im also using Year 1 and 2 Packs with the 3 in one SS
     
    Last edited: Nov 29, 2019
  6. parrotheada1a

    parrotheada1a Well-Known Member

    Joined:
    Jun 21, 2017
    Messages:
    299
    Likes Received:
    454

    Welcome to the forums. Try using the MCM to see what settings are in there for it. The holotape has some enable/disable settings in there that you can play with too. Realize that NONE of the settings are instant. You may have to let the scripts run a bit before you get what you want. You can always go back to the mayor's desk and refresh all the plots in the settlement. Let it run for as long as it needs. Very important detail!
     
  7. NDCowdy

    NDCowdy Well-Known Member Patreon Supporter

    Joined:
    Sep 30, 2017
    Messages:
    324
    Likes Received:
    437

    I'm not familiar with the 'prospector tent', which add-on is that from? And again, are you trying to choose a new plot via the asam sensor on the power pole or are you going by what is being generated when a plot is built?
     
    parrotheada1a likes this.
  8. bullyrook

    bullyrook Well-Known Member Community Rockstar

    Joined:
    Oct 7, 2017
    Messages:
    765
    Likes Received:
    908

    It's from Sebbo's Another Brick in the Wall Add-On (also in a mega pack, i believe). Starts off as a surveyor's tent then branches in two different directions at level 2, each of which have two different options at level 3. One of which is a Cement Factory and is awesome!
     
    NDCowdy likes this.
  9. Valwinz

    Valwinz New Member

    Joined:
    Nov 22, 2019
    Messages:
    9
    Likes Received:
    3

    [​IMG]
    whats MCM?
    also i let it run and still nothing

    also uploaded my load order
     

    Attached Files:

  10. WeiseDrachenJaeger

    WeiseDrachenJaeger Active Member

    Joined:
    May 24, 2017
    Messages:
    96
    Likes Received:
    164

    I've encountered this issue a few times. It's frustrating, but there's a fix that's worked for me: Build a City Planner's desk, access the building plan drawer (below the safe where you donate supplies), and use that to reset local plans. Then give it a minute or so and try activating the plot again.
     
    NDCowdy and parrotheada1a like this.
  11. parrotheada1a

    parrotheada1a Well-Known Member

    Joined:
    Jun 21, 2017
    Messages:
    299
    Likes Received:
    454

    I couldn't really see what is going on with your load order. MCM stands for Mod Configuration Menu. Look for it on Nexus. It has a lot of settings for SS and a bunch of others. Also do a search for LOOT and use it. It will help sort out your load order. It's not perfect, but it handles things quite well. Question for you... do you have any other SS plots on the site? If not, that could be the problem right there.
     
    NDCowdy likes this.
  12. Valwinz

    Valwinz New Member

    Joined:
    Nov 22, 2019
    Messages:
    9
    Likes Received:
    3

    i have other SS plots

    I try it and still the same

    [​IMG]
    Also i notice i have no city plains for if i were to put a leader ect
     
    Last edited: Dec 2, 2019 at 4:07 PM
  13. stjohnmccloskey

    stjohnmccloskey Member

    Joined:
    Nov 5, 2019
    Messages:
    67
    Likes Received:
    51

    Hmm; I'm no expert, but if you've got no city plans my first thought is that you might not have the 3 in 1, but might only have the base mod! (that would also make it so that only advanced industrial from add-ons would be available)

    But the fact that you have them in sanctuary kind of undercuts that theory.
     
    bullyrook and parrotheada1a like this.
  14. WeiseDrachenJaeger

    WeiseDrachenJaeger Active Member

    Joined:
    May 24, 2017
    Messages:
    96
    Likes Received:
    164

    I admit I've been playing heavily modded, so things don't look the same to me as they would normally, but where in the vanilla Starlight is there a sidewalk, grass, and steps like that so close together?
     
  15. parrotheada1a

    parrotheada1a Well-Known Member

    Joined:
    Jun 21, 2017
    Messages:
    299
    Likes Received:
    454

    I didn't think of that. Good work. The next thing I would suggest is to download a pack of city plans off Nexus and try using one. Be carefull though, some of them require a small flotilla of other mods to make them look and work properly.
     
  16. Valwinz

    Valwinz New Member

    Joined:
    Nov 22, 2019
    Messages:
    9
    Likes Received:
    3

    I want to apologize to you guys because as one of you say somehow i dont know why i was using plain old SS and not the 3 in 1.

    I dont know how it happen it seems when i redownloaded the files i got the wrong one and did not notice it .

    is it safe for me to uninstall SS and use the 3 one instead?
     
    stjohnmccloskey and bullyrook like this.
  17. stjohnmccloskey

    stjohnmccloskey Member

    Joined:
    Nov 5, 2019
    Messages:
    67
    Likes Received:
    51

    Nothing to be sorry about! Glad we got to the bottom of it!

    I did the same thing. I think the big vortex button on nexus doesn’t download the 3 in 1!

    yep you should be able to just install the 3 in one and carry on!
     
  18. parrotheada1a

    parrotheada1a Well-Known Member

    Joined:
    Jun 21, 2017
    Messages:
    299
    Likes Received:
    454

    Not a problem, happy that you got it sorted out. One thing going forward, make sure that you don't have any other SS 'master' files running. Meaning ROTC and IR. If you have those installed, you will need to remove those too before installing the 3 in 1 pack.
     
    stjohnmccloskey likes this.

Share This Page