the Sim Settlements forums!

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Severe save game stability issue plus Power Armour entry/exit CTD, need help please.

Khtugg

New Member
Messages
13
Greetings People,
I've run into problems the last couple of playthroughs. It seems like my save files get unstable rather quickly. Last time I ground to a halt the file's play length was in single digit hours! And I don't know if it's related but after playing a bit and I then enter or exit power armour I get a Crash To Desktop. Happens at the Concord museum, I make a save before entering the power armour there and poof! CTD. Played without pause from the start of the game. If I then boot up that save I can enter the suit without problems but when I then exit it at Sanctuary Hills a CTD happuns. Game is not too happy about Radstorms as well, a CTD might happen in those. Save file in question is at 22 Mb in size, I loaded it in ReSaver and it had 1 active script running.

I would be ever so thankful if you could help me out, if you need more info give a holler, I shall answer the best I can.

Kind regards,
Khtugg
 

Attachments

  • Problemet Loadorder.txt
    9.2 KB · Views: 8
You have a boat load of PA mods. There might be a conflict or most likely, one of them has a bad nif or texture that is causing the CTD.

A weather mod is most likely causing your radstorm issues.

You might want to look into installing Buffout 4 to help find the culprit.
 
Thank you kindly for reponding, I will start troubleshooting with this info straight away!
 
Ok, I got Buffout working. Just got this here crash log. I do not know what to look for, is it the line "Unhandled exception "EXCEPTION_ACCESS_VIOLATION" at 0x7FF732BAB0AE Fallout4.exe+21AB0AE" at the top that is important?
 
Hmmm, can't upload the file. How about this?
 

Attachments

  • Crashlog.txt
    44.5 KB · Views: 4
FallSouls.dll - I'm going to assume this is a F4SE plugin. If it is, I would start by looking at the posts on the Nexus page to see what issues are being reported. You can also try removing this and see if the problem goes away. The other thing you can do is post your crash log on the Buffout 4 Nexus page.
 
Thanks for the reply! I have made a post at the Buffout 4 thread, hopefully there will be a response. I'll will check out Fallsouls today and prod n' poke it a bit.
 
Top