the Sim Settlements forums!

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Solved [JtBryant's Utilities][PC] wireing issue (v 0.9.9)

JohnnyGuitar

New Member
Messages
5
for some odd reason after i updated your pack from (v 0.9.5) to (v 0.9.9) i suddenly lost the ability to start a wire from the level 1 generators to snap onto the power line outside the substation power plot and the connectors on the walls are gone?

was all this intentional or was this a mistake?
 
Since 0.9.7 the plot itself produces the power not the generators, the plots also must be worked get the power/water/defense output.
 
unless theirs a power conduit manually planted onto the building nothing gets powered on my game save with the current version.
 
You are using the version 1.1.8a+ of Sim Settlements right? Did you hit it with the IBB?
 
You are using the version 1.1.8a+ of Sim Settlements right? Did you hit it with the IBB?

yes to both questions

i have version 1.1.8a+ of Sim Settlements .. i can update i guess to see if that fixes things.

still no power without power conduit or no power conduit appearing anywhere on the walls inside or outside after using the IBB hammer.

all my buildings are saying they need power too without the conduit attached manually and manually wiring it all up.

i also prefer the old style better as it felt as if the whole thing was wired and connected on a grid instead of magical wires running through the concrete plot labs.
(ignore my rant if you can't go back to that if it causes things to break or stop working)
 
Odd, could you show a screen shot of you looking at the plot in workshop mode, should look like this.
upload_2017-6-20_14-31-38.png
 
20170620232427_1.jpg here is what i have + the conduit showing
i do have a wire connected to the conduit to the power line it is very hard to see
 
Top