the Sim Settlements forums!

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

CTD When turning previous Settlement into City

shplamana

New Member
Messages
3
Posted this over on the main announcement page Announcement: Rise of the Commonwealth:

Had to create an account for this amazing mod.

So I had a pretty decent settlement setup at Sanctuary already, ~19 settlers.

Planted the city planners desk and did the city plan, told it to burn everything to the ground. It worked at first, but I had a CTD right as it got done building the city plan, and started self destructing all the plots I had made before.

Loaded it again and tried self destructing it myself beforehand and it worked fine. Did the city plan and it built everything just fine, except the settlers didn't start picking up jobs/plots automatically. So I quickly saved, quit, and then reloaded, and immediately everyone got to work. And then I CTD again.

Don't have any mods other SS and the other approved/whitelisted mods.
 
I got a CTD when turning a pre-built Tenpines Bluff into a City Plan, I'm testing now to see if I can pin down the plot causing the issue. In my case the CTD always happens during the phase where it is destroying old plots.
 
I got a CTD when turning a pre-built Tenpines Bluff into a City Plan, I'm testing now to see if I can pin down the plot causing the issue. In my case the CTD always happens during the phase where it is destroying old plots.

I am having this same problem, and it seems to happen every time I let the settlers tear stuff down. If I do the auto destruct sequence from the holotape or desk before I start a city plan, it goes to completion. It does not have to be the "full" destruct sequence, just the one that destroys ASAM plots, it seems.
 
I am having this same problem, and it seems to happen every time I let the settlers tear stuff down. If I do the auto destruct sequence from the holotape or desk before I start a city plan, it goes to completion. It does not have to be the "full" destruct sequence, just the one that destroys ASAM plots, it seems.

kinggath said it's in part because the load on the engine to both destroy and build at the same time is pretty high
 
Personally.. I use the Town Meeting Gavel to scrap the settlement first. Runs really fast! :)
Then, launch a RotC plan.
 
Top