Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Long story short, I've built a whole bunch of indoor plots rather than outdoor ones and I'm regreting it. Is there a way to let me start over? I have spend so much ASAM sensors I practically cannot destroy the plot and build with new sensors!
Just to check what you are actually asking here:
1. Do you want to scrap everything that you have placed/built within the whole settlement;
2. Do you want to scrap just the SS2 plots and nothing else; or
3. Do you want to know if you will recover (get back) the ASAM sensors after you have scrapped the plots?
Long story short, I've built a whole bunch of indoor plots rather than outdoor ones and I'm regreting it. Is there a way to let me start over? I have spend so much ASAM sensors I practically cannot destroy the plot and build with new sensors!
Just to check what you are actually asking here:
1. Do you want to scrap everything that you have placed/built within the whole settlement;
2. Do you want to scrap just the SS2 plots and nothing else; or
3. Do you want to know if you will recover (get back) the ASAM sensors after you have scrapped the plots?
I always make sure I have the vertical "arrowhead" which determines the orientation of the plot in my view. That's when I scrap it if I need to. I hope that helps.
I also never knew this was possible until some of the fine people in this forum mentioned it